Page 6
4.2.
NX2
1.
Remove screws:
-
Remove 4 screws on the front (Torx T10)
-
Remove 8 screws on the back hinges (Torx T10)
-
Slightly loosen 2 screws on the back (Torx T10)
-
Slightly loosen 2 screws on the bottom of the hinges (Torx T20)
2.
Lift the front panel off the base. Push the top corner of the lamp dimmer plate in slightly, while lifting the
front panel off the base.
Summary of Contents for NX4
Page 1: ...Page 1 SMPTE MIDI Kit Installation Guide NX4 NX2 NX Wing...
Page 13: ......