background image

 

G E N E R A L   I N F O R M AT I O N  

INTRODUCTION 

Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate 
this device. These instructions contain important safety and use information. 

UNPACKING 

Every device has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the 
shipping carton for damage that may have occurred during shipping. If the carton is damaged, carefully inspect the 
device for damage, and be sure all accessories necessary to install and operate the device have arrived intact. In 
the  event  damage  has  been  found  or  parts  are  missing,  please  contact  our  customer  support  team  for  further 
instructions. Please do not return this device to your dealer without first contacting customer support. Please do 
not discard the shipping carton in the trash. Please recycle whenever possible. 

CUSTOMER SUPPORT 

Contact Obsidian Controls Systems service for any product related service and support needs. 

Also visit forums.obsidiancontrol.com with questions, comments or suggestions. 

OBSIDIAN CONTROL SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET  

+31 45 546 85 63 | Fax +31 45 546 85 96 | support@Obsidian Control Systemslighting.eu 

REPLACEMENT PARTS please visit parts.obsidiancontrol.com 

 

 

Summary of Contents for NX DMX















Reviews: