4
www.observint.com
© 2019 Observint Technologies. All rights reserved.
Lock nut
Pan:
0˚ ~ 360˚
Tilt:
0˚ ~ 90˚
Rotation:
0˚ ~ 360˚
2.
A rotation set screw is located just behind the camera body. If a rotation adjustment is needed,
loosen the set screw, adjust the horizontal alignment of the camera image, and then retighten
the screw.
3.
After adjusting the camera for the preferred field of view, click the
Setup
tab, and then click the
Image
link in the left frame.
Adjust the Brightness, Contrast, Saturation and Sharpness of the image as follows.
—
Image Adjustment
submenu (see above): Adjust the Saturation, Hue, Brightness,
Contrast and Sharpness of the video image. Each parameter can be set to a level of
0 ~ 100 either by moving the slider or entering the value in the box on the right. The
effect of the adjustment will appear in the Live View image in the menu.
4.
Open the other submenus on this screen. Adjust the following as needed. Refer to the Camera
Firmware User Manual for your camera for additional information about parameter settings.
—
Exposure Settings
submenu: In this submenu, set the following for the best
performance:
Iris Mode
: Select Auto or Manual. Some cameras may not offer both options.
Exposure Time
: Value ranges from 1/3 to 1/100,000 s. The nominal value is 1/150.
Adjust it according to the lightening condition.
Gain
: Set the gain to show the optimal brightness level.
—
Switch Day and Night
: Select either
Auto-Switch
,
Scheduled-Switch
, or
Triggered by Alarm Input
.
If using
Auto-Switch
, open the
Day/Night Switch
submenu to select the
Sensitivity, Filtering Time, and Smart IR feature ON or OFF.
If using
Scheduled Switch
, set the
Start Time
and
End Time
of the switch, then
open the
Day/Night Switch
submenu to select the
Smart IR
feature ON or OFF.
Also, click the
Common
,
Day
and
Night
tabs to set the Saturation, Hue, Brightness,
Contrast and Sharpness for Day and for Night modes.
—
Day/Night Switch
submenu: You can set the Day/Night switch to Day, Night, Auto, or
Schedule. The option you select determines the submenu options.
Day
or
Night
: These options both have one parameter: Smart IR.
Auto
: If you select Auto switch, you can set the sensitivity (0 .. 7), filtering time and
Smart IR.
Schedule
: Use Schedule to set that
Start Time
and
End Time
for the switch. Smart
IR is also selectable.
—
Backlight Settings
: Backlight settings include BLC Area (Off, Up, Down Left Right
Center), the area to control, and
WDR
(Wide Dynamic Range) ON or OFF.
—
White Balance
: White Balance selection is used to correct colors in the image
depending on the lighting source. You can also set the white balance manually (MWB),
using Automatic White Balance (AWB1), and lock the white balance setting (Locked WB).
—
Image Enhancement
: Options in this submenu include Digital Noise Reduction (DNR)
ON or OFF. If ON, you can also adjust the level of noise reduction.
—
Video Adjustment
: Video Adjustment includes:
Mirror
: Mirror adjustment enables you to flip the image (Up/Down), flip Left/Right
(reflect or Center).
Rotate
: Rotate rotates the image +90 degrees. Rotate and Mirror can be used to
adjust the image in any orientation.
Video Standard
: Select 60 Hz for NTSC format.
Capture Mode
: To make a complete use of the 16:9 aspect ratio, you can enable the
capture mode when you use the camera in a narrow view scene.
—
Other
: Options in this menu depend on the features of the camera.
Specifications
Camera
ALI-NS4014R
Image Sensor:
1/2.5” Progressive Scan CMOS
Signal System:
NTSC
Min. Illumination:
Color: 0.008 lux @ (F1.2, AGC ON), 0.014 lux @ (F1.6, AGC ON),
0 lux with IR
Shutter time:
1/3 s to 1/100,000 s
Slow shutter:
Supported
Digital noise reduction:
3D DNR
Wide Dynamic Range:
120 dB
3-axis adjustment:
Pan: 0° to 360°, tilt: 0° to 90°, rotate: 0° to 360°
Lens
Lens, FOV
2.8 mm, horizontal FOV: 109°, vertical FOV: 60°, diagonal FOV: 131°
Focus
Fixed
Lens Mount:
M12
Aperture
F1.6
IR
IR range
100 ft
Wavelength
850 nm
Compression Standard
Video Compression
Main stream: H.265 / H.264,
Sub stream: H.265 / H.264 / MJPEG,
Third stream: H.265 / H.264
H.264 Type
Main Profile/High Profile
H.264+
Main stream supports
H.265 Type
Main Profile
H.265+
Main stream supports
Video bit rate:
32 Kbps~16 Mbps
Smart feature set
Behavior Analysis
Line crossing detection, intrusion detection, object removal detection, unattended baggage
detection
Exception Detection
Scene change detection
Face Detection
Yes
Region of Interest (ROI)
Supports 1 fixed region for main stream and sub-stream
Image
Max. Image Resolution:
2688 × 1520
Main Stream:
50 Hz: 25 fps (2688 × 1520, 2304 × 1296, 1920 × 1080)
60 Hz: 30 fps (2688 × 1520, 2304 × 1296, 1920 × 1080)
Sub Stream:
50 Hz: 25 fps (640 × 480, 640 × 360, 320 × 240)
60 Hz: 30 fps (640 × 480, 640 × 360, 320 × 240)
Third Stream:
50 Hz: 25 fps (1280 × 720, 640 × 360, 352 × 288)
60 Hz: 30 fps (1280 × 720, 640 × 360, 352 × 240)
Image Enhancement:
BLC / 3D DNR
Image Settings:
Rotate Mode, Saturation, Brightness, Contrast, Sharpness, and white balance adjustable by
client software or web browser
