1
www.observint.com
ALI-NS2114VR 4MP Vari-focal IP Dome Camera Quick Installation Guide
ALI-NS2114VR_CQ
180904
Screw stud for
junction box (3)
Conduit
adapter
Hole for
through-
surface cable
routing
Screw holes for single-
gang box mounting #1 (2)
Screw holes for
double-gang box
mounting - #2 (4))
FRONT
Adapter plate (camera side)
Ground terminal
Sealing plug
for interface wiring (5)
Sealing plug
for LAN cable
Junction box (adapter plate side)
Safety cable
Seal (black)
Junction box
Adapter plate
Sealing plug
for interface wiring (5)
Captive screws connect
to adapter plate (3)
FRONT
Junction box (inside view) with adapter plate
Hook for safety cable
Connector block terminals for
alarms, audio, LAN, power
Side inlet
Side
inlet
cover
Inside camera base (junction box removed)
This document guides you through the basic steps to install and configure the ALI-NS2114VR network
vari-focal dome camera. This camera features:
•
1/2.5” 2560 × 1440 pixel Progressive Scan CMOS
•
2.8 ~ 12 mm motorized vari-focal lens
•
Low light 0.008 lux color minimum illumination
•
H.265, H.265+, H.264+, H.264, MJPEG video compression
•
120 dB Wide Dynamic Range
•
Back light compensation (BLC) / 3D dynamic noise reduction (DNR) / region of interest (ROI)
•
IP67, IK10 vandalproof rated, TVS 2000V Lightning Protection
•
Compatible with ALI-AF11 Flange Adapter
•
4 behavior analyses and face detection
For more information, refer to these documents - available from your equipment vendor:
•
ALIBI™ Tools Utility Installation and User Manual
•
ALIBI™ Witness 2.0 r3 App for Android or iOS Quick Start Guide
•
ALIBI™ IP Camera Firmware Version 5.4 User Manual
(or later) provided at:
AlibiSecurity.com/resources
Lens
Dome
Dome
cover
screws
Adapter plate
and junction box
Camera body
Dome assembly
Maintenance panel
(microSD slot, RESET)
Motorized zoom lens
Dome safety cable
Maintenance panel
(microSD slot, RESET)
Captive screw for
junction box (3)
Connector for BNC video cable
Gimbal
camera
mount
Camera without dome assembly
