OMC-131 True wind display
Users’ manual
V1.14
Page 26
TDC-April-2017
5.2 Set output device
The main menu is shown again. Select "Set
output device" to adjust the communication
speed for all the possible outputs.
Select "2" from the menu shown.
The new window shows what can be
expected on the different output ports.
The output is fixed, the only thing that can
be changed here is the transmission
speed for the different output ports.
Select the number in front of the option,
if done a new menu window will open as
shown below.
If the analogue output is available, with
number "6" of the menu true or relative
can be selected for the analogue signal.
Select the correct communication speed
for
the selected port and select "0" to return to
the
previous menu.
If all port are set to the correct
communication speed select "0" again to go
back to the main menu window.
