DIFF automatic volume flow meter
User manual
V11.2 - EN
Page
16
TDC 16-7-2012
OBSERVATOR
instruments
7.2 Adding a project
The first time a SD-card is used you
will be asked if the SD-card needs to
be prepared for use with DIFFiner.
Click OK. The SD-card will be
prepared for DIFFiner and the
projects that are already on your hard
disk will also be copied to the SD-
card.
DIFFiner will boot when the SD-card
is ready.
Click open to create a new project
The screen that opens will show the
already existing projects. Click new to
create a new project.
It is also possible to export projects to
a DIFF file. These files can be send
to engineers on location. The engineer
can import these files onto the DIFF.
Click on new to create a new project.
It is possible to create a database in the newly appeared screen. It is
possible to ad the following items to the database:
Fan setting (position of the HRS switch)
Type of room (e.g. Living room, bedroom)
Grill position (e.g. position 1, position 2, 2mm)
Grill type (e.g. STHXX)
Grill situations (e.g. Clean, unreachable)
The created items can be used in the section
Building. You can fill in as much as possible
information of the building that is going to be
measured.
