RTSA04NU User´s Manual
E
E
d
d
i
i
t
t
i
i
o
o
n
n
E
E
d
d
1
1
Page 6 of 47
1.1.-
Packing List
1 x ADSL2+Router 11N 4 Ports Eth with USB (RTSA04NU)
1 x PSU 12V-1A
1 x RJ11 telephone cable, 2 meters length
1 x RJ45 Ethernet cable, 2 meters length
1xDouble Filter
1xPrinted QIG
1.2.-
Safety Precautions
Take the following instructions to prevent the device from risks and damage caused by fire or electric
power:
Use the type of power marked in the volume label.
Use the power adapter in the product package.
Pay attention to the power load of the outlet or prolonged lines. An overburden power outlet
or damaged lines or plugs may cause electric shock or fire accidents. Check the power cords
regularly. If you find any damage, replace it at once.
Proper space left for heat dissipation is necessary to avoid damage caused by overheating to
the device. The long and thin holes on the device are designed for heat dissipation to ensure
that the device works normally. Do not cover these heat dissipation holes.
Do not put this device close to a heat source or under a high temperature occurs. Keep the
device away from direct sunshine.
Do not put this device close to an overdamp or watery place. Do not spill fluid on this device.
Do not connect this device to a PC or electronic product unless instructed by our customer
engineer or your broadband provider. Wrong connection may cause power or fire risk.
Do not place this device on an unstable surface or support.
1.3.-
LEDs and Interfaces
Front Panel
The following table describes the LEDs of the device
(FROM LEFT TO RIGHT)
LED
Color
Status
Description
Power
Green/Red
Off
Router powered off
Red
Failure on power-on self-test
Solid Green
Router powered on correctly.
ADSL
Green
Off
Router powered off
Blinking 2Hz
No line detected
Blinking 4Hz
Line training
Solid
Line up
Internet
Green/Red
Blinking Green
PPP/DHCP negotiation
Solid Green
PPP/DHCP up
Quick Blinking Green
Tx/Rx traffice on line
Solid Red
Authentication failed
WLAN
Green
On
Wi-Fi connection is available.
Off
Wi-Fi connection is unavailable.
Blinking Green
Negotiation or traffic on line.
LAN4-LAN1
Green
On
Ethernet connection is available.
