OBO Bettermann GES9-3B, Mounting Instructions

Page: 18 / 37

18 | EN OBO BETTERMANN
General safety information
2 General safety information
When handling the product, no special safety information must be observed.
3 Getting to know the GES9-3 plastic service unit
3.1 Overview
See Fig. and .
3.2 Product description
The GES9-3 plastic service unit consists of:
– Carpet protection frame
7
,
– Hinged lid.
The hinged lid consists of:
– Screws
1
,
– Pressure seat plate
2
,
– Spacer frame
3
,
– BA10 spacer (for 10 mm floor covering recess)
4
,
– Insulating plate
5
,
– Lid frame
6
,
– BA5 spacer (for 5 mm floor covering recess)
8
,
– Cord outlet
9
.
The GES9-3 plastic service unit is available with two different lid opening
mechanisms. When closed, both lid variants allow the passing of connection
cables through the opened cord outlet.
– Lid frame with handle clamp (see Fig. ,
1
)
– Lid frame with locking slider (see Fig. ,
1
)
The GES9-3 plastic service unit is suitable for twelve Modul 45 devices in
three installation housings (e.g. type UT4) for use in screed-covered duct sys-
tems, screed-flush underfloor ducts and system floors. The universal faste-
ning brackets in the frame are adjustable to raised floor thicknesses up to 65
mm. The minimum installation depth is 73 mm.
The carpet protection frame, hinged lid and cord outlet are made of PC/ABS.