16
17
5.1.3 Update device name and location
To update device name and location, please follow next steps:
1.
Tap next to the device name
2.
Select option “Edit” from the menu
3.
In the new dialog, change the device name and choose the device location from the drop
down list
4.
Tap the button OK
5.1.4 Replace failed device
Replace device is a special feature that allows you to replace failed device with a new one (the new
device must be of the same type as the failed one). The new device will replace the old one in your
smart home system, including smarts, rules, etc.
To replace failed device, please follow next steps:
1.
Tap next to the failed device name
2.
Select option “Replace device” from the menu
3.
This will start inclusion procedure on your smart home gateway (Illustration 22)
4.
Start joining procedure on the new device according to manufacturer’s instructions
5.
Upon successful joining there should be visual indication on the device (see manufacturer’s
instructions)
Illustration 22
Illustration 23
5.2 MANAGE DEVICES BY USING GATEWAY’S MAIN BUTTON
By using gateway’s main button, the user is able to:
1.
Add a device to the gateway
2.
Remove a device
(this applies only to Z-Wave devices)
5.2.1 Add a device to the gateway
Please follow next steps in order to add a new device to the gateway:
1.
Short press gateway’s main button 2 times to open network for device inclusion. While net-
work is open LED will blink blue once per second
2.
Start adding procedure on the device according to manufacturer’s instructions
3.
Upon successful operation LED will blink light purple 4 times. There should also be visual
indication on the added device (see manufacturer’s instructions)
5.2.2 Remove a Z-Wave device
Please follow next steps in order to remove a Z-Wave device:
1.
Short press gateway’s main button 4 times to start Z-Wave device exclusion procedure.
During the operation, LED will blink blue 5 times per second
2.
Start exclusion on the Z-Wave device according to manufacturer’s instructions
3.
Upon successful operation LED will blink light purple 4 times. There should also be visual
indication on the excluded device (see manufacturer’s instructions)
6. CONTROLLING AND MONITORING DEVICES
Please follow next steps in order to control or monitor devices:
1.
Select Devices option in the application’s main menu
2.
All devices added to your smart home system will be displayed on the screen (Illustration 23)
3.
In a quick control dialog of each device the user is able to control actuators (e.g. light on/off)
and monitor sensors (e.g. read the temperature)
4.
To filter devices by type press
in the upper right corner and choose desired device type
from the list
5.
To filter devices by location press
in the upper right corner and choose desired location
from the list
6.1 ADVANCED DEVICE CONFIGURATION
Please follow next steps in order to configure the device:
1.
Select device you wish to configure
2.
Tap next to the device name and choose option Device details (Illustration 24)
3.
Each change you enter will be immediately applied to the both, device and gateway
Illustration 24