Objet Eden500V, User Manual

Page: 81 / 130

DOC-00500 Rev. F
7–5
Eden500V/350V/350 User Guide
Figure 7-4: Eden printer indicators
Printer
Interface
Color Key
The background colors in the printer indicator fields tell you at a glance
whether or not the value or item is suitable or ready for printing.
•
Green —suitable/ready for printing
For example, in figure 7 ‐ 4:
ˆ
Ambient —The ambient temperature of the printing chamber is
within the acceptable range.
ˆ
Heads Liquid —The level of model and support material in the print ‐
block reservoir is OK.
ˆ
Heads Vacuum —The vacuum level in the system is within the
acceptable range.
ˆ
Pre ‐ Heater —The model and support resins need to be heated before
being supplied to the print block. The temperature has reached the
acceptable range.
•
Red —not suitable for printing (or indicates a warning)
For example, in figure 7 ‐ 4:
ˆ Waste —The weight of the waste container is 9000 grams, more than
allowed when beginning a print job. (See “Replacing the Waste
Container” on page 47.)
•
Blue —not ready for printing
For example, in figure 7 ‐ 4:
ˆ
UV lamps —The UV lamps are not on (or not operating at full power).
ˆ
Heads (°C) —The heads have not reached the temperature required
for printing models.
Block temp.
in front of
support heads
Block temp.
behind
support heads
Waste weight
Display
toggle button
Printer set to
online mode
(green)
Temp. of each
support head
Chamber temp.
Left UV lamp
Right UV lamp
Block temp.
behind
model heads
Temp. of each
model head
Block temp.
in front of
model heads
Support/Model
material in print-
block reservoir
System
vacuum level
Pre-heating of
support & model
material