9
English
Install the battery into the remote contro
4.
Remote control shell
Battery case
1
Pull out the battery case from the main unit of the remote control and pull out
1
the battery holder from the gap.
2
3
Insert the coin lithium battery into the battery case.
2
Pay attention to the polarity of the battery Insert the coin lithium battery into the
battery case.
Re-Insert the battery case into the main unit of the remote control until you hear
3
a click sound.
Attention
Remove the battery when it is not used for a long time.
•
The positive and negative terminals of the battery must be installed
•
correctly.
When liquid leakage occurs, clean it completely before inserting a new
•
battery.
When the remote control is not in use
Please place the remote control in the storage area behind the grille.
4
The remote control will adhere to the magnet.
Attention
Do not place the remote control in chest pocket if you are using a cardiac
pacemaker.
Range
About 15 feet in front of the main unit.
•
About 30° to the left and right sides in front of the main unit.
•
If there is an obstacle between the remote control and the main unit, the remote control
•
may not work properly.
When the DC plug is inserted into the power outlet, the product emits a
5.
sound.
1920̲01a̲F5̲FKLS-302D̲Eng.indd 9
1920̲01a̲F5̲FKLS-302D̲Eng.indd 9
2019/04/10 18:36:36
2019/04/10 18:36:36