Installation Requirements
In order to install the OASIS-blue card into your system, you will need the following:
PC with a half-length PCI or PCI-X slot available
Windows® XP, Windows® Vista® or Windows® 7 operating system
CD-ROM
drive
One free (hard disk style), power connector, with 2A at 12V available
Cross-head
screwdriver
OASIS Installation CD
Installation Process
The OASIS-blue installation process consists of three steps:
1.
Hardware Installation
. In this step, you will physically place the OASIS-blue card
inside your computer.
2.
Driver Installation
. After installing the hardware, you need to install the driver software
so that Windows recognizes the card and application software can use it.
3.
Configuration
. You will need to configure the OASIS-blue card to match your
particular system setup.
Once these steps are complete, the OASIS-blue card is generally ready for use. However, if you
are using a 3
rd
party application, you may need to install additional software so that your
application package can use the OASIS-blue controller to drive the motorized components of your
system. Refer to your application / system documentation for further details on how to configure
the application for use with OASIS-blue.
