Copyright 2010-2017 Obihai Technology, Inc.
112
natively on the phone (per service). To use the version that is provided by the soft-switch, the administrator should
disable the corresponding service on the phone to avoid ambiguity.
The only way of access from the phone is by going through the Net Services app. The user can enable/disable the
feature, set the forwarding number, and also the number of rings before forwarding the call; the setting is stored on
the server.
Anonymous Call
To make this function available on the phone, you must enable the option
SPn Service
–
Network Provided
Services
::
AnonymousCall
. This feature is similar to the AnonymousCall feature that is available natively on the phone
(per service). To use the version that is provided by the soft-switch, the administrator should disable the corresponding
service on the phone to avoid ambiguity.
In addition to going through the Net Services app, the following methods of access are available:
•
Feature Key: Define a feature key with the function
Block Caller ID
. Set the Service parameter of the
key to the SP service that provides this feature
The user can enable/disable this feature from the GUI; the setting is stored on the server.
Do Not Disturb
To make this function available on the phone, you must enable the option
SPn Service
–
Network Provided
Services
::
DoNotDistrub
. This feature is similar to the DoNotDisturb feature that is available natively on the phone
(per line). To use the version that is provided by the soft-switch, the administrator should disable the corresponding
feature on the phone to avoid ambiguity.
In addition to going through the Net Services app, the following methods of access are available:
•
Feature Key: Define a feature key with the function
Do Not Disturb
. Set the Service parameter of the key
to the SP service that provides this feature
The user can enable/disable this feature from the GUI; the setting is stored on the server.
