OBID
®
Manual
ID RW01L.AB-A
FEIG ELECTRONIC GmbH
Page 6 of 39
H20801-1e-ID-B.doc
1.3. Technical data
Circuit board dimensions (W x H x D)
45mm x 40mm x 16mm +/- 1mm
Connection
2 x 10-pin connector on the solder side
(pins: 0.7x0.7/ long incl. approx. 8mm insulator
Temperature range (operating and storage)
-20°C to +70°C
Supply voltage
5V DC
±
5 %
Current consumption
ca. 40 mA
Operating frequency
125 kHz
Antenna
Integrated (mounted on circuit board)
Supported transponders
•
read-only:
- ID CTx.A
- H4001, H4002, H4022, H4102,
- Unique
- Q5, e5555 (plain manchester 64 Bit
read-only mode)
•
read/write
- ID DTx.B
- Hitag 1
- Hitag S
Reading Range with ISO transponder card
•
ca. 80 mm
Interfaces
•
RS232-TTL
•
Data / Clock
-
Magnetic card emulation
(to (ISO 7811 Track1 or Track2)
- Wiegand
Emulation
Functions
•
Polling mode (over RS232-TTL)
Reading and writing transponder data
•
Scan mode (over RS232-TTL and Data / Clock)
Autonomous reading of transponder data
Applicable Norms
European RF Approval
EN 300 330
EMC
EN 300 683
1
Depending on the antenna size and Q-factor of the antenna in the transponder