background image

OBID

 

i-scan

 ® 

UHF 

Installation 

ID ISC.ANT.U270/270-FCC 

 

FEIG ELECTRONIC GmbH 

Page 2 of 16 

M30117-1e-ID-B 

 

Note 

 Copyright 2014 by 

FEIG ELECTRONIC GmbH 
Lange Strasse 4 
D-35781 Weilburg  
Tel.: +49 6471 3109-0 

http://www.feig.de

 

With the edition of this document, all previous editions become void. Indications made in this manual may be 

changed without previous notice. 

Copying of this document, and giving it to others and the use or communication of the contents thereof are 

forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved 

in the event of the grant of a patent or the registration of a utility model or design. 

Composition of the information in this document has been done to the best of our knowledge. FEIG 

ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this 

manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, 

despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. 

The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC 

GmbH does not give any guarantee promise for perfect function in cross environments and does not give 

any guaranty for the functionality of the complete system which incorporates the subject of this document. 

FEIG ELECTRONIC call explicit attention that devices which are subject of this document are not designed 

with components and testing methods for a level of reliability suitable for use in or in connection with surgical 

implants or as critical components in any life support systems whose failure to perform can reasonably be 

expected to cause significant injury to a human. To avoid damage, injury, or death, the user or application 

designer must take reasonably prudent steps to protect against system failures. 

Use Exclusion in Transportation Market: Devices which are subject of this document may NOT be sold, 

used, leased, offer for sale, or otherwise transferred, exported, and imported by anyone in the Transportation 

Market. “Transportation Market” means (i) Electronic Toll and Traffic Management (ETTM), (ii) Public Sector 

Vehicle Registration, Inspection and Licensing Programs, (iii) Railroad Locomotive and Wagon tracking, (iv) 

airport based ground transportation management systems (GTMS) and taxi dispatch, (v) revenue based 

parking, and (vi) vehicle initiated mobile payment applications, where the RFID sticker/tag is initially attached 

to the vehicle but not incorporated at the point of vehicle manufacture.  

FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this docu-

ment and makes no representation that they free of patent infringement. FEIG ELECTRONIC GmbH does 

not convey any license under its patent rights nor the rights of others.  

OBID

®

 and OBID i-

scan

®

 are registered trademarks of FEIG ELECTRONIC GmbH. 

 

 

Summary of Contents for ID ISC.ANT.U270

















Reviews: