GB
5
Installation
Installing the product
Figure 1 – Page 3
– Measure the dimensions for the drill holes for fix-
ture.
– Mark the drill holes on the ceiling.
– Drill the holes and insert the dowels.
– Screw firmly to the wall/ceiling.
Figure 2 – Page 3
– Connect the power cable as shown.
Figure 3 – Page 3
– Mount the product as shown.
Inserting/changing the bulbs
Figure 4 – Page 3
– Insert the bulb as shown.
– Change the bulb as shown.
Service
• Have your product repaired by a qualified speci-
alist only.
This will maintain the safety of your product.
Troubleshooting and help
If you are unable to eliminate the fault yourself, ple-
ase directly contact an store in your area. Please
remember that repairs carried out by non-professio-
nals will invalidate your warranty claim and may
cause additional costs.
Maintenance
• Before carrying out any work on the product,
ensure that the unit has no power.
• Check all screws regularly to ensure that they sit
tight. This will maintain the safety of your pro-
duct.
Cleaning
• Clean the product with a cloth lightly moistened
with clean water (if necessary with a little
washing up liquid added). Wipe with a dry cloth.
• Do not use abrasive or sharp objects or aggres-
sive cleaning agents.
Storage and transportation
• Always store the product in a dry location.
• Always store the product in a location away from
frost.
• When moving the product, protect from dama-
ges.
Disposal
Disposal of product
These electrical and electronic devices must be dis-
posed of separately.
Contact your community authorities for information
regarding the correct disposal of the product.
By disposing of the product correctly you are ensu-
ring that it will be recycled or processed for reuse.
This helps to prevent hazardous material from dama-
ging the environment.
Disposing of the packaging
The packaging consists of cardboard and marked
plastics that can be recycled.
– Take these materials to a recycling centre.
Disposing of the bulbs
– Dispose of bulbs correctly with the household
waste.
DANGER! Risk to life!
The electrical con-
nection may only be carried out by an
appropriately qualified professional.
Before installation, switch off the power to
the electrical network (switch off at the
main switch/fuse box).
CAREFUL! Product damages!
Do not
touch the glass panel of the bulb with your
fingers. Fingerprints burn themselves into
the glass, become visible and shorten the
life time of the bulb.
DANGER! Risk to life!
Unprofessional
repairs may mean that your product will no
longer operate safely. This endangers you
and your environment.
Products with this symbol may not be dis-
posed of with the household waste.
800332_333_334_335_336_337_Spot_LED.book Seite 5 Montag, 9. Mai 2016 1:02 13
