54
that you contact your doctor if the irregular heart rhythm symbol appears several times in succession
(5 times or more).
Memory
This blood pressure device can be used by two users. Each user can store up to 60
measurements.
1.
Press / .
2.
Choose user 1 or 2 by pressing / .
3.
Press
to enter memory.
4.
The blood pressure device will first show the average of the three most recent measurements
stored in the memory.
5.
Every time
is pressed, previously stored measurements are shown. The latest
measurement is shown first.
6.
To clear memory press / to choose user 1 or 2.
7.
Press and hold the button
for approximately 5 seconds and all data for the chosen user
are erased automatically.
Recalibration service
All blood pressure devices must be recalibrated to ensure continual measurement accuracy
The blood pressure device should be recalibrated after 2 years of normal use (approx. 3
measurements a day). Subsequently, the device will show “CA” on the display. The device should
also be recalibrated if e.g. it has been dropped on the floor or in fluids, if fluid has been spilled over
or on the device, or if it has been exposed to extremely high or low temperatures.
This monitor must only be calibrated by authorised personel and should therefore be sent to OBH
Nordica for re-calibration. Do not carry out any repairs yourself. Please contact the shop where you
bought the product for further details on the procedure for submitting the monitor.
Inserting and changing batteries
1.
Push out the tray at the bottom of the blood pressure monitor so that the battery compartment
door is exposed.
2.
Press slightly on the handle of door while you lift and remove it. Insert or change the batteries
in the battery compartment. Make sure that the batteries are placed correctly. The door is put
back in its place.
3.
The batteries must be changed when the battery symbol on the display shows low battery. The
battery symbol will disappear once the device is switched on and the battery is charged.
