154
Problem
Possible reasons
Solutions
Steam leakage from lid.
The sealing gasket is not
properly installed.
Remove the sealing gasket,
clean it and reinstall it in the
correct position.
The sealing gasket is dirty.
Remove the sealing gasket,
clean it and reinstall it in the
correct position.
The sealing gasket is
damaged, or the edge of the
cooking pot is damaged.
Send the appliance to an
Approved Service Centre for
repair.
Food is uncooked
Solid/liquid ingredients ratio
is incorrect.
Try again by following
precisely the quantities of
the recipe.
No electricity from the power
supply.
Check your home electric
circuit.
E0 displayed on the
digital screen.
Pressure switch is faulty.
Send the appliance to an
Approved Service Centre for
repair.
E1 displayed on the
digital screen.
The temperature sensor
is faulty.
Send the appliance to an
Approved Service Centre for
repair.
E2 displayed on the
digital screen.
The lid is not properly
positioned for your cooking
program. Each program
requires a specific lid position.
Check and adjust the lid
position required by your
cooking program, refer to the
cooking programs table in
part 6 of this manual. Restart
your program once the lid
is correctly positioned. If
the issue remains, send the
appliance to an Approved
Service Center for repair.
QK7788S0 - IFU - Multicooker - Turbo Cuisine & Fry - 29-06-2022.indd 154
QK7788S0 - IFU - Multicooker - Turbo Cuisine & Fry - 29-06-2022.indd 154
2022-06-29 14:33
2022-06-29 14:33
