23
Before use
The hairdryer can be adjusted to 110 and 230V and is therefore ideal when
you travel. Remember to set the desired voltage before you plug in the
appliance. You switch voltage by turning the “screw” which is placed on the
backside of the handle.
Wash, towel dry and brush your hair. If you like you can add some mousse or
hair gel and then style your hair with the hairdryer.
Use
Plug in the appliance and select the switch position for the desired airflow/
heat
setting.
Switch
0 = Off
1 = 600 W low heat/speed
2 = 1200 W high heat/speed
Concentrator
The air concentrator helps you to direct the airflow to a certain area. The
concentrator is easy to take off and attach to the front of the dryer. Use a
comb or brush to style your hair.
Overheating
The hairdryer has an automatic overheating protection device, overheating can
for ex. be caused by a blocked air intake or outtake. If the hairdryer overheats,
it will automatically shut off. Turn off the appliance and wait a few minutes
before restarting it.
Maintenance and cleaning
• Before cleaning, disconnect the appliance from the mains.
• Never immerse the appliance or it´s cord in water or any other liquid.
• You can clean your appliance with a slightly damp cloth and wipe it with a
dry cloth after.
• Please remember to clean regularly the air intake slot with a brush to remove
dust and hair from the air inlet grill.
Disposal of the appliance
Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling. Electrical and electronic equipment
marked with the symbol indicating separate collection of such
equipment must be returned to a municipal waste collection point.
5132_CS_UVN_0914.indd 23
2017-06-02 10:14:34
