24
Parts of the appliance
1. Plastic knob
2. Lid
3. Strainer
4. Coffee basket
5. Tube
6. Body
7. Water level indicator
8. Pilot light
Using the percolator
1. Check that the appliance is not plugged in. Remove the lid, coffee basket and
tube from the percolator body. Fill the percolator with the desired amount of
water. Never fill above the MAX marking (12 dl). Do not plug the appliance yet.
2. Rinse the basked to prevent coffee grind to come into the appliance. Measure
the coffee grains out into the basket – one heaped spoon per cup. Do not
fill the basket up to the edge with coffee. Distribute the coffee evenly in the
basket. Place the strainer on the basket and place the basket/strainer over the
tube.
Place the tube and the basket into the central hole at the bottom of the
percolator body. Check that the tube is correctly placed in the bottom by
turning it. Place the lid on the percolator.
3. Place the cord in the percolator body and after that, plug it to a wallsocket.
When the percolating process is complete, the indicator light will switch ON,
indicating that the appliance is in keep warm mode. The temperature of the
coffee will remain constant until you pull the plug.
Note! Be careful to fill enough water in the unit before switching it on. Never
use the appliance without water. Never use warm water though it may result in
tasteless coffee!
1
2
3
4
5
6
7
8
2436_2437_2399_KL_UVN_100813.indd 24
8/26/2013 9:26:14 PM