2. If necessary, wipe down the coffee bean box (B) and the cover (A) with
a damp cloth.
3. Wipe down the housing with a damp cloth. If necessary, use a little mild
detergent if necessary.
4. Check the mains cable regularly for any damage.
Cleaning the Grinder Shaft
1. Remove the coffee beans from the coffee bean box (B). (Apart from
the few beans that you cannot reach by hand.)
2. Insert a basket filter paper into the filter insert.
3. Press the button to switch on the appliance. The grinding process will
start.
4. Once the rest of the coffee beans have been ground – you can tell this
from the change in the grinding noise – stop the grinding process by
pressing the button again.
Unplug the Appliance
5. Take out the coffee bean box: To do this, turn it a little anticlockwise
until it disengages (fig.7). Lift it off.
6. Move the grinding fineness dial to the “Open” position.
7. Pull out the top part of the grinder (D).
8. Clean the grinder shaft and the grinder with cleaning brush.
9. Reinsert the top part of the grinder and press it down. Make sure it is in
the correct position (arrow marking). Fold the handle down again.
10. Adjust the grinding fineness dial back to a grinding fineness. The
grinder is locked again.
11. Place on the coffee bean box at an angle and turn it clockwise a little
until it engages.
12. Dispose the filter paper and clean Grind and brew basket (C).
Descaling cycle
1. Fill water tank with descaling solution (or vinegar).
2. Press Descaling button (H9). Descaling indicator (G6) appears on the
display.
3. Press On/Off button (H1) to start the descaling cycle:
– On/Off indicator (H2) flashes
– Descaling indicator (G6) flashes
– Hot descaling solution goes across the empty filter holder
4. When the descaling cycle is finished:
– On/Off indicator (H2) switches off
– Descaling indicator (G6) stops and disappears
Note
:
� Descaling cycle can last longer.
� After the descaling cycle, launch 2 cycles using tankful clear water (10
cups) to rinse the machine.
56
