![background image](http://html1.mh-extra.com/html/obh-nordica/bjorn-axen-tools-straight-and-curl-nano-pro/bjorn-axen-tools-straight-and-curl-nano-pro_instruction-manual_3222538015.webp)
OBH Nordica Björn Axén Tools Straight & Curl Nano Pro
Before Use
Before the appliance is used for the first time, read through the instruction manual carefully
and save it for later use.
Use
Make sure that your hair is dry and comb it through. If you have very thick hair you can use
hair clips to separate the hair to make the styling easier.
Plug the appliance. Start the appliance by turning the temperature knob to desired setting,
the pilot lamp lights. Choose temperature depending on your hair type, see recommended
temperatures below. Always select the lowest temperature level (120ºC) when using the
appliance for the first time.
120-140˚C – fine, fragile coloured hair
140-170˚C – normal hair
170-200˚C – thick, dense hair
200-230˚C – very coarse hair
Place the appliance on the heat resistant mat (pouch) during hating.
Note! This appliance reaches very high temperatures. Keep the heated parts away from
scalp, face, neck and hands. Never use the appliance on wigs, extensions and artificial hair
without testing on a thin hair section first, otherwise the hair may melt.
If you like to use the appliance as a curling iron
Hold the appliance by the handle on a safe distance from the skin and eyes. Use a mirror.
Take a hair section of appr. 5 cm between the plates near the roots. Spread the hair section
between the plates, press the plates and turn it 180 degrees and then draw the appliance
toward the ends in a smooth movement. If you like to curve the ends you just angle the
appliance when you reach the ends. For best result wait until the hair has cooled before you
brush or comb the hair.
If you like screw curls you roll up less hair. The less hair the tighter curls. Always shut off the
appliance by turning the temperature knob to OFF and pull the plug after use.
If you like to use the appliance as a straightener
Hold the appliance by the handle on a safe distance from the skin and eyes. Use a mirror.
Take a hair section of appr. 5 cm. Spread the hair section between the plates and close the
appliance. Draw the appliance from the roots through to the ends. Never hold the appliance
still. For best result start at the roots and work your way to the hair ends. Always shut off the
appliance by turning the temperature knob to OFF and pull the plug after use.
Auto shut off
This appliance has a safety function that makes it shut off automatically after ca 1 hour. This
auto shut off function is meant as an extra safety precaution, so remember to shut off the
appliance by turning the temperature knob to OFF and unplug the appliance after use.
15
3099_LA_1110.indd 15
2010-11-23 08:59:51