20
21
IMPORTANT!
In order to get full battery effect the first charging should be on for at least 16
hours. Do not use the vacuum cleaner until this first charging has been completed.
The LED lamp on the motor part will be on to indicate that the charging is ongoing, and it
will be on as long as the vacuum cleaner is positioned in the charging base with the current
on. If the LED lamp is not on, press the on/off button. We recommend that the handheld
vacuum cleaner is connected to the supply circuit for max 3 days on end, as continuous
charging for a long period may damage the batteries.
How to use the handheld vacuum cleaner
Remove the vacuum cleaner from the charging base and switch it on by pressing the on/off
button. When you want to switch off the appliance, press the on/off button again.
Before starting, check that the filter is positioned correctly.
Never use the vacuum cleaner
without the filter as this might cause dust and/or liquid to be sucked into the motor part,
which may be damaged. Such damage is not covered by the warranty.
Before you use the handheld vacuum cleaner, you should also consider whether the surface
of e.g. a table or a floor is too sensitive and might be scratched by moving the vacuum
cleaner across it. If this is the case you should not use the vacuum cleaner on such a
surface.
Please note that the suction capacity of the handheld vacuum cleaner depends on the
cleanness of the filter and the amount of dust etc. in the container. We recommend that you
empty the container often – preferably each time you have used the appliance.
IMPORTANT!
Do not use the handheld vacuum cleaner to remove sparks, warm ash,
embers or cigarette stubs. Do not suck up organic solvents, acid, explosive dust/liquids or
other poisonous products.
Cleaning and maintenance
Make sure that the adapter is unplugged and that the handheld vacuum cleaner is not in
operation when the cleaning starts.
Do not use gasoline or other dangerous means for cleaning the parts of the handheld
vacuum cleaner. Wipe the parts with a damp cloth. Do not use any kind of washing or
dishwashing machine for cleaning the parts. Never, under no circumstances, immerse in
water or let the motor part and the adapter get in contact with water.
The air suction must not be covered during use and should be cleaned at regular intervals
by using a small brush or similar, while the vacuum cleaner is off.
How to empty the container
1. Hold the vacuum cleaner with the container facing downwards. Turn the container in
such a way that the dot on the container aligns with the ”open padlock” symbol
and carefully pull off the container.
2. Remove the filter and empty the container.
3. If the dust filter is very dirty, it can be cleaned. Brush the filter using a soft brush or rinse
carefully in soapy water. Be sure to thoroughly rinse all soap from the dust filter.
4. Dry the dust filter carefully before remounting.
7098_7099_7100_IM 141111.indd 20
14-11-2011 09:17:26
