![background image](http://html.mh-extra.com/html/obh-nordica/3105/3105_instructions-of-use_721834021.webp)
130-160˚C low temperature - thin, fine hair/coloured hair
160-190˚C medium temperature - normal hair
190-200˚C high temperature - very thick and dense hair
Position the curling iron with the ON/OFF button facing upwards in order that
the curling iron is resting on the stand. Make sure that the support is even and
heat-resistant.
Make sure that the hair is completely dry before you use the curling iron.
Open the clamp of the curling iron and press an approximately 5 cm wide hair
section. Spread the hair section evenly in the clamp and roll the iron towards
the scalp. If you just want to curve the hair ends with the curling iron, you
just place the ends in the clamp and wind the hair half a turn or a full turn as
you wish. Hold it for about 5-8 seconds depending on the length and texture
of the hair. Open the clamp carefully and release the curl from the iron. To
maintain the curl let the hair cool before combing or brushing.
If you want screw curls, roll up less hair. If you want to have bigger and softer
curls, roll up more hair.
Make sure that the hot parts of the curling iron do not touch your scalp, your
face, neck or hands. Do not use the appliance for wigs, hair extensions or
artificial hair without having tested the appliance on a small section of hair, as
there may be a risk that the hair will melt.
Button locking function
In order to lock the buttons in order to avoid inadvertent changing of the
temperature setting or switching off the curling iron, press the – button on the
handle until three points between the digits in the display go on. In order to
unlock, press the – button until the points on the handle go off.
Auto-off function
The curling iron is automatically switched off after about 60 minutes and the
display shows OFF: Note that the curling iron is not switched off completely
until it has been unplugged. In order to reactivate the curling iron press the
ON/OFF button and set the wanted temperature. The auto-off function is a
supplementary safety function, but as a main rule, the appliance should always
be unplugged after use.
Cleaning and maintenance
• Switch off the appliance by pressing the ON/OFF button until OFF is
displayed. Unplug and let the curling iron cool completely on a heat-
resistant mat before cleaning. The curling iron reaches very high
temperatures during use and consequently it takes some time before it has
cooled off completely. Make sure that the appliance is out of the reach of
children.
• Never immerse the appliance and the cord in water of any other liquid.
• Be careful that water does not penetrate into the housing!
20
21
Summary of Contents for 3105
Page 1: ...HOLLYWOOD HAIR TODAY CORK SCREWS TOMORROW ...
Page 23: ...23 ...