25
Use
Place your toaster on a dry level surface. Be sure bread carriage lever is in up
position and connect the appliance. The variable selector (1-6) makes it easy
to set the desired position. Insert slices of bread and press the bread carriage
lever down until it locks into position. The metal grids will automatically adjust
to the size of the bread. The heatingelements activates automatically. (Note!
The Bread carriage lever can not be locked if the appliance is not connected
to the outlet.) When the toasting cycle is completed, the toast is automatically
ejected up and the heatingelements are turned off. If you like to interrupt the
toasting, press the stop button and the bread lever will automatically eject.
WARNING: Bread may burn !!
Therefore only use the toaster under supervision, and do not use it
near or under curtains and other combustible material.
”Safety touch”
The toaster is equipped with heat insulated longsides which is an important
argument for metal toasters that reaches very high temperatures. The center
of the longsides reaches max +60 (measured after 5 toasting cycles in a row).
Note that the upperside, where the heat escapes still is very hot - avoid to
touch this area.
Thick & Thin
The metal grids are automatically adjusted to the size of the bread so that the
bread slices gets evenly toasted.
Crumb tray
The extensible crumb tray makes it easy to remove crumbs from the toaster.
If bread get stuck in the toaster, disconnect the appliance and let the toaster
cool. Turn the toaster upside down and carefully shake it to get the bread out.
It this doesn´t help you can try to get the bread out by using some kind of tool.
Never use metal objects for this purpose and don´t touch the heatingelements
since this can damaged the toaster, damage caused by carelessness is not
covered by the warranty.
NB!
The crumb tray must always be positioned in the toaster during use.
High Rise
This function makes it easier to grab the bread from the toaster when it´s
ready. Push the lever upwards when the lever has ejected and the bread is
toasted.
Cleaning and maintenance
Let the toaster cool off before cleaning. The bread carriage lever should be in
its top position and the appliance should be unplugged. Slide out the crumb
tray and discard crumbs. Simply wipe the exterior with a clean damp cloth and
dry thoroughly. Do not use abrasive cleansers as this may harm the surface.
2232_2234_KK_UVN_0414.indd 25
2017-02-16 15:16:18