59
OB-X8 User’s Guide
Chapter 3: Page 2 Parameters
Split Mode Page 2 Parameters
When Split Mode is engaged, and with Upper/Lower unselected, press-
ing Page 2 reveals an additional set of parameters specific to Split Mode.
Note that you have to have both the Lower and Upper switches off to
access these parameters, otherwise you are accessing the Page 2 param-
eters of the Lower or Upper sound.
1 . Balance:
Allows for adjustment to the volume balance between the
Upper and Lower presets used in the Split program.
2 . Split Point:
Use this parameter to set the Upper/Lower split point
from C0 to C5.
3 . Lower Transpose:
Allows the Lower preset to be transposed by +/-
three octaves. The Lower preset can also be transposed upward relative
to C0 by pressing and holding Split and Lower and pressing the desired
key.
4 . Upper Transpose:
As above, allows transposition of the upper preset
by +/- three octaves. The Upper preset can also be transposed downward
or upward relative to C2 by pressing and holding Split and Upper and
pressing the desired key.
5 . Lower Detune:
Allows the Lower preset to be Detuned against the
Upper preset by +/- 50 cents. The Lower Detune can also be set by hold-
ing Lower and turning the Osc 2 Detune knob.
6 . Pan Mode:
Sets the overall panning for the Split or Double program.
This takes over from the Pan Mode settings saved for the Upper and
Lower presets.
7 . Pan Width:
Sets the overall pan width for the Split or Double
program. This takes over from the Pan Width settings saved for the
Upper and Lower presets.
8 . Hold/Chord Params:
Selects whether Hold/Chord mode uses the
saved setting from Upper, Lower, or Split program.
9 . Lever Box Params:
Selects whether the Lever Box uses saved
settings from the Lower, Upper, or Split program.
Summary of Contents for OB-X8
Page 1: ...USER S GUIDE www oberheim com ...
Page 8: ...viii Oberheim ...
