7 |
P a g e
ObeDog Ultra / Ultra Dual Training Collar Setup / Operation Guide
Setup: Remote Transmitter
Preparing the Remote Transmitter for First USE:
Please charge the Remote Transmitter for approximately 30 - 45 minutes.
The Charging Port is located on the top of the transmitter.
Battery Indicator: During a charge, the icon will flash and when the unit is fully charged it will turn solid notifying
you charging is completed.
Operation: Remote Transmitter
1. To turn On/Off the Remote Transmitter, press the
Power Button
for 2-3 seconds.
2. Select different Receivers by pressing the
Menu/Mode Button
, The LCD Icons will change between A, B, or AB (Both
Receiver Units). Applicable to Dual Models with 2 Receiver Collars or when you add a second Receiver in the future.
3. To deliver Vibration Stimulation, press the
Vibration Button
.
4. To deliver Static Shock Stimulation, press the
Static Shock Button
.
5. For Sound Training from the Receiver, press the
Receiver Tone Button
.
6. For Sound Training from the Transmitter, press the
Transmitter Tone Button
.
7. The Remote Transmitter will go into
STANDBY MODE
if not operated for 2 minutes and will TURN OFF if not operated
for 5 minutes.
8. In
STANDBY MODE
, press
Menu/Mode Button
to wake the transmitter.
Programming: Remote Transmitter
1. Turn ON the Remote Transmitter by pressing the Power Button for 2-3 seconds.
2. Press the
Menu/Mode Button
and hold for 3 seconds until you hear a beep and the Menu items begin to blink.
3. The Initial Program Mode is for Receiver A, Press Menu/Mode again to filter thru each Programmable Stimulation
(Receiver Tone, Static Shock, Vibration, Transmitter Tone).
4. Use the
Receiver Tone Button
(Upper Left) and Transmitter Tone Button (Upper Right) to adjust Levels for each
Stimulation.
5. Repeat Step 4 for second Receiver Unit (B) and for Both (AB). (Apply to Dual Version)
6. Once Programming is complete, press the Menu/Mode Button again for 3 seconds until a beep sounds.
Setup / Operation Guide