7 |
P a g e
ObeDog Stride / Stride Dual Training Collar Setup / Operation Guide
Setup: Remote Transmitter
Preparing the Remote Transmitter for First USE:
Charge the Remote Transmitter for approximately 30
– 45 minutes
Connect the charger to the charging jack and plug the charger into a standard outlet
The red LED should be lit which indicates charging
Once it is fully charged, the LED will turn off automatically
Low battery indicator: the symbol
will show up on the right downside of LCD screen when it needs to be recharged.
Operation: Remote Transmitter
1. To turn On/Off the remote transmitter simply hold the
Mode Button
for 5 seconds.
2. Access different modes by pressing the
Mode Button
. The LCD images will change between
3. To select different Vibration or Static Shock Correction levels, press the
Up/Down Buttons
on the right side of the
remote transmitter.
4. Press the
Channel Button
to select between 1 or 2 Receiver Collars. (Applicable to Dual Models with 2 Receiver
Collars or if one choose to upgrade in the future)
5. The Remote Transmitter will go into
STANDBY MODE
if not operated for 2 minutes and will TURN OFF if not operated
for 5 minutes.
6. In
STANDBY MODE
, press any button (except LED light button) to wake the transmitter.
7. If the transmitter is TURNED OFF, hold the
Mode Button
for 5 seconds to TURN ON the unit.
Setup: Receiver Collar
Preparing the Receiver Collar for First USE:
Charge the Receiver Collar for approximately 30 - 45 minutes
Open the rubber cover and connect the charger connector into the charging hole
Plug the charger into a standard outlet
The red LED should be flashing which indicates charging is in progress
Once it is fully charged, the LED will turn off automatically
Setup / Operation Guide
