Obdstar TP50, User Manual

Page: 5 / 16

TP50 User Manual
3
⑨ Down Down
⑩ Right To right
⑪
OK OK
⑫
Up Up
⑬
F2 Keyboard input option key
⑭ Test
Start TPMS test
(with the Tire Pressure Sensor activated)
⑮ Display Screen Show information
⑯
USB Interface Connect with USB cable
⑰
Testing cable port Connect to the main test cable
NOTE ：
1. shows the device is in charging
2. shows the power capacity of the device
3. Power ON: short press the Power Button to turn on the device
4. Power OFF: press the Power Button for 2 seconds until the device vibrates
5. Auto Power OFF: the device will automatically turn off, if it stays standby
for 5 minutes without any operation
6. Charge: Please charge the device with the attached USB cable and power
adapter. Any other non-permited power will possibly cause the device
damage and warranty invalidation. Please charge the device for 2hours
before use.
1.3 Hardware technical specification

Dimension: 202mm(L)*106mm(W)*31.6mm(H)

CPU : ARM7

Power Supply:DC12V

Operation Power:DC12V

Operation Temperature: -20~60 ℃

Display Screen: 320 × 240