3. When it connects to charger, battery logo indicates
, it indicates that the battery is in charging.
4. When battery logo changes into
, it indicates that the battery is fully charged
and then disconnect charger from AC outlet.
5. Unplug USB cable on the charger from this device.
7 USING BATTERY
● If the battery keeps unused for a long time or battery
is completely discharged, it is normal if it cannot be
turned on while being charged. Please charge it for a
period and then turn it on.
●Using data service will cause more power
consumption and shorten the stand by time.
● The charging time of battery varies with temperature
condition and battery consumption status.
● While this device has low battery, a beep will sound.
If it is very low, this device will be switched off
automatically.
Note: Do one of the followings to save power:
1. When this device keeps unattended, press POWER
key to turn off the LCD.
Summary of Contents for MS80
