10
If not detect the code, “Code is not stored in
module!” information is displayed on the
screen.
If the retrieved DTC contains any code
specified by manufacturer or the enhanced
codes, and then “Controlled by manufactur-
er” is displayed on the screen.
Caution: Delete the diagnostic code of
decoder may not only delete the code on
truck-mounted computer,but also delete
“Freeze Frame” data and the enhanced
data of the manufacturer. In addition, I/M
ready monitor status of all vehicle monitors
are reset as non-ready and non-finish state.
Do not delete the code before the
technicians check the system completely.
3.2 Erase Codes
Read Codes
Erase Codes
View Freeze Frame
I/M Readiness
Vehicle Info.
Data Stream
RealTime Curve
Diagnostic Menu 2/9
