EN
24
3
Use
3.1
Charging the battery
It is essential to charge the battery for at least 2 hours before using the clippers for
the first time.
Charge the clippers at least once during the year following the date of delivery.
The battery reaches its full capacity after 3 or 4 charging cycles.
Use
only
the
power
pack
reference
RY035100EU
(see Fig. 1-M and § 5).
When charging, it is recommended to switch off the clippers
(On/Off button in OFF position, Fig. 1-B).
Charging clippers from mains
Insert the electrical lead into the socket of the clippers (Fig. 3).
Connect the power pack (Fig. 1-M) to a mains power socket.
During charging, the red indicator light (Fig. 1-D) comes on steadily and
the green indicator light (Fig.1-C) flashes. When the battery is fully
charged, the green indicator light comes on steadily.
The autonomy is about 210 minutes.
When completely charged, disconnect the power pack. The clippers can
now be used without the electrical lead.
3.2
Operation
When first used, lubricate the blades by applying a drop of oil to the points shown
(Fig. 6b).
Switching on/off
Switch the clippers on by setting the On/Off button (Fig. 1-B) to “ON”.
The indicator light (Fig. 1-C) flashes.
To switch the clippers off, set the On/Off button (Fig. 1-B) to “OFF”.
The indicator light (Fig. 1-C) goes out.
Use with or without electrical lead
With a new, fully charged battery, the clippers can be used without the
power lead for about 210 minutes.
The red
indicator light rouge (Fig. 1-D) flashes before the end of the period of
