Fitting the Car Seat Brackets
(optional)
Remove the bumper bar.
The car seat brackets should be fitted with the clip facing out, away from the seat (as
shown above). Push the car seat brackets onto the bumper bar mounts, either side of
the seat unit until they click into place (fig.47 & 48).
To remove the car seat brackets, lift the clip away from the seat and press the button
underneath the bumper bar mount, then remove the car seat bracket from the chassis
(fig.49).
fig. 47
fig. 50
fig. 55
fig. 53
fig. 48
fig. 51
fig. 56
fig. 54
fig. 49
fig. 52
fig. 57
Fitting the Car Seat
(optional)
Adjusting the Car Seat Handle
Removing the Car Seat
(optional)
After fitting the car seat brackets, lower the car seat onto the brackets (fig.50 & 51).
Ensure the car seat clicks into place securely (fig.52).
To adjust the car seat handle, depress the red buttons on both sides of the car seat
(fig.55) and turn the handle to the desired position (fig.56). Ensure the handle clicks
into place securely (fig.57).
To remove the car seat, lift the red safety locks on both sides of the car seat and lift the
car seat up away from the chassis (fig.53 & 54).
WARNING: For further instructions on how to use the car seat, please refer to the
Instruction Manual provided with the Car Seat.
WARNING: For further instructions on how to use the car seat, please refer to the
Instruction Manual provided with the Car Seat.
WARNING: For further instructions on how to use the car seat, please refer to the
Instruction Manual provided with the Car Seat.
“Click”
“Click”
“Click”
Press
Press
Lift
12
13
www.obaby.co.uk
www.obaby.co.uk
