OBaby ZeZu Multi Tandem, Instructions Manual

Page: 4 / 6

Before fitting the ride on board, ensure that the adaptors and either the seat unit or car
seat has a child in and are fitted on to the chassis (see page 3 & 4), to avoid tipping.
Line up the ride on board stems with the receivers on the chassis (fig.69) and push the
ride on board down, until it clicks into place (fig.60 & 71).
To remove the ride on board, press the buttons on the inside of the stem receivers, on
both sides of the chassis (fig. 72 & 73), and lift the ride on board up, away from the
chassis (fig.74).
fig. 72 fig. 73 fig. 74
“Click”
Fitting and Removing the Ride On Board
fig. 69 fig. 70 fig. 71
Lift
Press
Fitting and Removing the Rear Seat
Before fitting the rear seat, ensure that the adaptors and either the seat unit or car seat
has a child in and are fitted on to the chassis (see page 3 & 4), to avoid tipping.
Line up the rear seat stems with the receivers on the chassis (fig.63) and push the rear
seat down, until it clicks into place (fig.64, 65 & 66).
To remove the rear seat, press the buttons on the inside of the seat stem receivers, on
both sides of the chassis (fig. 67 & 68), and lift the rear seat up, away from the chassis.
fig. 66 fig. 67 fig. 68
“Click”
fig. 63 fig. 64 fig. 65
Press
6 7
www.obaby.co.uk www.obaby.co.uk