INSPECTION AND MAINTENANCE
Make sure to keep the battery and charger out of the reach of children when charging. Do not attempt to disassemble or modify the battery or charger. Do not use the battery
or charger for purposes other than those intended.
When the battery reaches its minimum voltage, it is necessary to switch to pedalling. The battery must be recharged before driving again.
During the charging process, the charger and battery should be placed in a stable and cool place. The operating temperature range of the battery should be between 32 and
110 degrees Fahrenheit. Do not cover the battery or charger. Make sure that no liquid comes into contact with the charger.
Note: The battery switch should be turned off using the bottom switch when the battery is charging. The battery must be fully charged before first use. It is recommended to
charge the battery for at least 6 hours after the first 3 uses. If the bicycle is not used for a long time, it is necessary to fully charge and remove the battery. When
not in use, keep the battery off and recharge it every 2 months.
Low Voltage Protection
When the battery output voltage reaches the limit, the electronic control system will automatically cut off the power to protect the battery.
Charging indicator
Red indicates charging, green indicates the battery is full.
Handbrake cut-off power When your
bicycle is equipped with a brake cut-off system, it will automatically cut off the power when the brake is applied.
Battery charging
Connect the connector between the charger and the battery, then plug the charger into an electrical outlet. The LED indicator on the charger will be red which means it is
charging. When the light turns green, the battery is fully charged. After charging is complete, first disconnect the charger from the power supply and then disconnect the
connector between the battery and the charger.
When your E-Bike is not in use, turn it off.
Machine Translated by Google
