Page Three
www.obaby.co.uk
Assembling your cot bed
Step 1
Starting on one end of the base fit the barrel nuts in the holes
provided on the base corners .
Ensure the slits are facing the inside of the base.
Step 2
Decide how high you would like your base;
- For a new born - to make it easier for the parent the base can be at
its highest.
- Once the child can start to sit up unaided you should lower the base
to prevent the baby climbing out or over the rails.
Once you have decided what level you are fitting the base,
fit the long screws in the 2 holes in the base
Step 3
Using your allen key & the long screws fit the base to the
first end & then fit the other end the same way.
2 x long screws per side (8 in totaly for the base).
Highest level for new borns until they can sit up unaided
Middle Level for babies sitting up until they are standing/climbing
Lowest Level for babies that can stand
Top Tip! don’t tighten all the screws fully until you have completed assembling.