OBaby Lincoln Sleigh Cot Bed, Instructions Manual

Page: 3 / 12

www.obaby.co.uk
• Please be aware that the lowest base position is the safest and the base should
always be used in that position as soon as the baby is old enough to sit up.
ROUTINE CARE & MAINTENANCE
– For cleaning, use only a mild detergent and warm water.
– DO NOT USE BLEACH.
– DO NOT USE any abrasive substances.
– From time to time, check your cot for loose screws, and worn parts. Replace or
adjust the parts as needed.
Due to constant updating and improvements, some components may occasionally
differ slightly from the images shown in these instructions. We reserve the rights to
change the specifications of any products without prior notice. If you need any
assistance please contact your Obaby retailer from whom you purchased your
product, who will take appropriate action.
• All assembly fittings should be tightened properly and care should be taken to
ensure that no screws are loose, as a child could trap parts of the body, or clothing
(e.g. ribbons, drawstrings, necklaces) this could lead to strangulation.
• Regularly check that all fittings and components of the cot/bed are fully tightened
and in working order.
• To prevent injury from falls the cot bed should not be used as soon as the child is
able to climb out.
• This cot bed should be assembled by an adult. Please note that this is a heavy cot
• The cot bed is designed to be dismantled for storage or transportation.
bed which will be more easily assembled with the help of an assistant.
To prevent injury from falls:
As soon as the child is able to climb out of the cot then it should be changed into the
bed mode for use up until 4 years of age.
Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed
should not be placed to other furniture or windows, and should be placed either tight
to the wall or have a gap of 300mm between the wall and the side of the bed.
Safety Warnings
3