Fitting and Removing the Hood
Adjusting the Hood
fig. 24
fig. 27
fig. 25
fig. 28
fig. 26
fig. 29
To fold the hood, lift the hood adjusters up on both sides of the hood, as shown above.
fig. 30
fig. 33
fig. 31
fig. 34
fig. 32
fig. 35
Using the Harness
Press
To fit the hood, place the hood on the chassis, inline with the seat unit. Clip the hood
catches onto each side of the chassis (fig.24).
Then to prevent the hood slipping down wrap the velcro straps around the chassis
(fig.25).
Waist
Strap
Crotch
Strap
Chest
Strap
Clasp
To fasten the harness, clip each chest strap onto the waist strap (fig.30) and insert both
fasteners on the waist strap into the clasp on the crotch strap (fig.31 & 32).
To release the harness, press the centre of harness clasp (fig.33).
Adjust the harness length using the buckles on each strap (fig.34).
‘D’ Ring
The ‘D’ rings highlighted are provided for fitting a separate harness complying with BS
6684 (fig.35).
WARNING:
Always use the crotch strap in combination with
the waist belt
‘D’ Ring
8
9
www.obaby.co.uk
www.obaby.co.uk
