OBaby Atlas, Instructions Manual

Page: 4 / 7

Fitting and Removing the Front Wheels
fig. 12 fig. 13 fig. 14
Using the Front Swivel Wheels
To lock the swivel wheels, first ensure the front wheels are facing forward inline with the
chassis, then lift the lever up (fig.15).
To put the wheels in swivel mode, push the lever down on the front of each front wheel
(fig.16 & 17).
fig. 15 fig. 16 fig. 17
Adjusting the Backrest
Applying the Brakes
fig. 18 fig. 19
Lock
Release
Release
Lock
To lock the brakes fully, push down on each brake lever using your foot (fig.18).
To release the brakes, lift each brake lever using your foot (fig.19).
Apply the brake before putting your child into the pushchair.
Apply the brake when the pushchair is stationary.
fig. 20 fig. 21 fig. 22
1.Press
2.Pull
To recline the backrest, press the button on the toggle and pull away from the seat to the
desired height (fig.20). Lower the seat to rest on the toggle (fig.21).
To put upright, grip the sides of the toggle with one hand, and the strap with the other
hand and slide the toggle up the strap to the desired height (fig.22).
To fit the front wheels, push the wheels onto the front legs until they click into place
(fig.13 & 14).
To Remove, squeeze both clips, whilst pulling the wheel off the leg (fig.15).
6 7
www.obaby.co.uk
www.obaby.co.uk