OBaby Atlas V2 Stripe, Instruction Manual, Page: 6 / 8

fig. 36 fig. 37 fig. 38
Adjusting the Calf Rest Fitting the Car Seat to the Stroller
To adjust the calf rest press the levers either side of the seat and lift or lower to the
correct position (fig.36-38).
Press
fig. 42
fig. 45
fig. 43
fig. 46
fig. 44
fig. 47
10
11
www.obaby.co.uk
www.obaby.co.uk
fig. 39 fig. 40 fig. 41
Fitting the Raincover
To fit the raincover, place the raincover over the stroller and allow the raincover to drape
over the front of the stroller.
Secure in place using the velcro tabs on the back of the raincover (fig.39) and velcro
straps onto the front legs of the stroller (fig.40 & 41).
To install the car seat, clip the car seat adaptors onto either side of stroller frame as
shown (fig.42-44). Ensure the adaptor is aligned with the metal pegs and lock into
position by closing the mount fully (fig.43). Repeat this for both sides of the stroller.
Position the car seat over the car seat adaptors, taking care to align the car seat with
both adaptors. Press down until you hear a click and the car seat is fully inserted
(fig.45-47).
You can adjust the car seat handle by pressing the red button on both sides of the
handle, while rotating the handle.
Please proceed to the next page to ensure the car seat is correctly and safely installed.
Continued....
WARNING: When using the raincover, regularly check your child has adequate
ventilation and is not overheating.
Unless it is raining, the raincover should be removed.