2
2- TOP RAILS INSTALLATION
Position and place the top rails as indicated in figure 2.1. The top rail
must be pushed at the maximum to the inside of the pool to ease the future seat
caps installation. Insert the 1 inch screws (Q) and screw gently.
Even the space of each top seat ends to make sure it is centered between
the uprights.
When all the top rails are installed, fill the pool 2 feet from the top before
continuing to the other step.
Be sure that the two axis of the uprights are leveled by pushing gently
to the inside before tightening the screws permanently.
Install all necessary equipment (i.e. skimmer, filter, etc) per
manufacturers specifications.
Figure 2.1
3- SEAT CAPS, COLLARS AND BASE COVERS
INSTALLATION
Collar
Enlarge the collar to make sure that the
collar hooks can pass over the post. Insert
these hooks at the back of the post, right
underneath the top rail, in the openings
between the post and the wall. (figure 3.1)
Inserted in the round section posts only.
Base cover
The base cover is inserted the same way
as the collar. Enlarge and insert at the post
base. (figure 3.2) Inserted in the round
section posts only.
Figure 3.1
Figure 3.2