PLT SERIES POOL & SPA PUMP - INSTALLATION AND OPERATION MANUAL
Page
9
of
13
PLEASE NOTE
• If the pump is hard wired, a qualified electrician should remove the wiring
• On some models the pump is fitted with an internal check valve to reduce reverse flow of water
through the pump
• Barrel unions need to be hand tightened. No sealant, glues or silicones are required
• When making any enquiries about your
Oasis Aquatics PLT Series Pool & Spa Pump
be
certain to quote the model number from the nameplate located on motor
• Never run pump dry. Running the pump with no water may damage the mechanical seals, causing
leakage and flooding. Dry running damage and associated damage is not covered under warranty
• Failure to undertake regular maintenance may cause damage not covered by warranty
• The pump is not intended for use by young children or infirm persons without supervision. Ensure
that young children are supervised at all times to ensure that they do not play with the pump
Summary of Contents for PLT Series
Page 1: ......
