SE SERIES SINGLE-ELEMENT CARTRIDGE FILTER INSTALLATION AND OPERATION MANUAL
Page
4
of
19
READ UNDERSTAND AND FOLLOW ALL SAFETY AND
OPERATION:
Do not operate the filter until you have read and clearly
understand all the operating instructions and warnings for you
pool filtration system equipment.
The following instructions are intended as a guide for the initial
operation and ongoing maintenance of the filter in a general
pool installation.
Failure to follow all operating instructions and warnings can
result in property damage or severe personal injury or death.
To reduce the risk of injury, do not permit children to use this
product
ELECTROCUTION HAZARD
Direct water discharge from air relief valve away from electrical
equipment. Do not locate electrical equipment over or near
filter.
Due to the potential risk that can be involved, it is
recommended that any pressure tests are kept to the minimum
time required by the relevant local codes. Do not allow people
to work around the filtration system while pressure testing is
occurring. Post appropriate warning signs and establish a
barrier around the pressurised equipment. If the equipment is
located in an equipment room, lock the door and post a
warning sign.
Never attempt to adjust any closures or lids or attempt to
remove or tighten bolts when the system is pressurised .
These actions can cause the closure to separate and could
cause severe personal injury or death if they were to strike a
person.
Never exceed the maximum operating pressure of system
components. Exceeding these limits could result in a
component failing under pressure. This instantaneous release
of energy can cause the closure to separate and could cause
severe personal injury or death if they were to strike a person.