EN
9
Fitting the water feature
•
Mount the unit on a firm ground, e.g. sidewalk slab. (The assembly material is not included in
the scope of delivery.)
•
Ensure a safe, horizontal position.
WJL0006
Fitting the pump
NOTE
If the pump is used for conveying excessively muddy water, the impeller unit will be subject to
increased wear and will require earlier replacement.
Thoroughly clean the pond or pool before installing the pump.
Install the pump at a raised level above the bottom of the pond. This reduces intake of muddy
water.
•
Install the pump housing horizontally on a firm, mud-free surface. Ensure that the pump hous-
ing is securely positioned.
•
Operate the pump only when it is covered with at least 4 in (10 cm) of water. Otherwise, it may
draw air.
WJL0005
