![background image](http://html1.mh-extra.com/html/oase/solarsafe-41/solarsafe-41_operating-instructions-manual_3122286009.webp)
9
- GB -
Installation and connection
Set-up the unit
How to proceed:
Place the unit horizontally on the ground ensuring its stable position.
−
Do not expose the unit to direct sunlight.
Connect the unit
How to proceed:
B
−
Connect the OASE unit with suitable circular connector to the respective connection socket and hand-tighten.
Connection socket
Description
Connection of OASE SolarModule 35
−
Two connection sockets. One solar module is connected to each connection socket.
Connection of electrical consumers
−
Power is supplied directly via the solar modules. A sufficient power supply depends on the solar radiation.
−
Any excess solar power is used for charging the rechargeable battery.
Connection of electrical consumers
−
Power is supplied directly via the rechargeable battery. This ensures a uniform power supply, independent of the
solar radiation.
Connection of electrical consumers
−
A dusk to dawn controller switches the consumer on and off. The dusk to dawn controller automatically determines
the sunset and sunrise times.
−
The consumer is turned on at sunset and switched off again after six hours.
−
Two hours before sunrise, the consumer is switched on again and is switched off again at dawn.
Start-up
How to proceed:
B
−
Remove the protection hood.
−
Connect the male and female connectors of the rechargeable battery/charge controller together and ensure that
they properly engage.
The unit is now operational.
Status indicator on the charge controller:
LED Status
Description
On
Charge controller has detected night
Flashes
Charge controller has detected day
Off
No rechargeable battery connected, rechargeable battery or fuse defective
On
Power supply switched off due to deep discharge of the rechargeable battery or overvoltage
Flashes
Output is switched off due to excessive power consumption
−
Max. load current of output is 10 A
Off
Connection
Correct operation
On
Power supply switched off due to deep discharge of the rechargeable battery or overvoltage
Flashes
Output is switched off due to excessive power consumption
−
Max. load current of output is 10 A
Off
Connection
Correct operation
Summary of Contents for Solarsafe 41
