Oase ProMax Rain 4000, Operating Instructions Manual, Page: 15 / 160

DE
EN
FR
NL
ES
PT
IT
DA
NO
SV
FI
HU
PL
CS
SK
SL
HR
RO
BG
UK
RU
CN
15
Manual mode
The pump remains permanently switched
on if the float switch is set vertically and
the cable points downward.
N O T E
The pump can run dry in manual mode.

Switch off the pump when the minimum
water level is reached.

Running the pump dry increases wear.

F

Move the handle into the horizontal po-
sition and push the cable directly at the
transition to the float switch into the ca-
ble clip such that the float switch is in a
vertical position.
Installing the pump

G

Install the pump in a horizontal and sta-
ble position in the water.

If the filter screen becomes clogged by
dirt particles, install the pump in an ele-
vated position.

If it needs to be lowered into a well or a
shaft, fasten a rope to the handle. Do
not carry it by the power connection
cable.

Ensure that the float switch can always
move freely.
SWITCHING ON AND OFF
W A R N I N G
Dangerous electrical voltage!
Death or severe injury from electrocu-
tion.

Only connect the pump to the power
supply when there are no persons in or
reaching into the water.

Before stepping into or reaching into the
water, switch off all units located in the
water.
Switching on the unit

Insert the power plug into the socket.
– The pump is ready for operation.
– The pump will start up as soon as the
level of the water reaches the switch-
on height.
Switching off the unit

Disconnect the power plug.
– When the pump is switched off, resid-
ual water in the hose may flow back
and out of the pump intake.
N O T E
Do not use the unit for long-term opera-
tion. Otherwise this will impair the operat-
ing life of the unit accordingly.