14
ProMax Pressure Cistern 6000/6
Accessories
•
OASE ProMax Garden Automatic
Switch (44538) controls the pump dur-
ing water withdrawal. The pump is swit-
ched on and off automatically.
•
OASE ProMax Floating Intake (57772)
changes the position of the pump in-
take. This prevents sand or dirt particles
from being drawn into the pump.
Intended use
ProMax Pressure Cistern 6000/6, referred
to as "unit", may only be used as specified
in the following:
•
For pumping clear water or rain water.
•
For irrigating and watering.
•
For pumping the water out of water
butts/rain barrels or cisterns.
•
Operate in accordance with instruc-
tions.
Possible incorrect use
The following restrictions apply to the unit:
•
Not suitable for salt water.
•
Not suitable for drinking water.
•
Do not use for long-term operation (e.g.
continuous recirculation of the water in
a pond).
•
Do not use for commercial or industrial
purposes.
•
Do not use in conjunction with chemi-
cals, foodstuff, easily flammable or ex-
plosive substances.
•
Do not connect to the drinking water
supply.
INSTALLATION AND CONNECTION
The pump is only suitable for vertical in-
stallation. The float switch will not be able
to switch unimpaired if the pump is in-
stalled horizontally.
Connecting the pressure hose
An optimum flow rate is achieved with a
hose inside diameter of 25 mm (1").
How to proceed:
B
1. Remove the protection cap.
2. Connect the pressure hose and adapter
to the connection on the pressure side.
– Recommendation: Use a quick-re-
lease coupling.
Installing the pump in a bored well or
shaft
C
•
Attach the fixing rope with a double knot
to the lugs and lower the pump into the
bored well or shaft.
•
Use the fixing rope to fix the pump at a
height of at least 1.5 m above the bot-
tom of the well or shaft.
– This prevents it from drawing in dirt
particles.
•
Ensure that the screen on the suction
side is at least 150 mm below the sur-
face of the water.
•
Do not carry the pump by its power con-
nection cable.
•
From a well or shaft depth of 5 m, fix the
power connection cable to the fixing
rope at a distance of 5 m from the pump
(strain relief).
Summary of Contents for ProMax Pressure Cistern 6000/6
