Oase ProMax 3000, Operating Instructions Manual

Page: 11 / 179

EN
11
Safe operation

Do not expose the pump to rain or use it in a wet or damp environment.

Do not use the unit, if electrical lines or the housing are damaged.

If a power connection cable is damaged, have it immediately replaced by OASE, an authorised
customer service or a qualified electrician to prevent electric shock.

Do not carry or pull the unit by its power cable.

Route lines in such a way that they are protected from damage and do not present a tripping
hazard.

Never carry out technical changes to the unit.
 Only carry out work on the unit that is described in this manual.

Only use original spare parts and accessories.
Intended use
Only use the product described in this manual as follows:

For transferring water from and draining basins or ponds/pools.

For irrigating and watering.

For pumping clear water or rain water.

Extraction of water from a well.
–
Only for irrigation and watering purposes!

For pumping the water out of water butts/rain barrels or cisterns.
– Size of the particles in the water: max. 2 mm.

To boost the pressure of the mains water.
–
Max. permissible internal pressure of the pump on the pressure side: 6 bar

While adhering to the technical specifications. (
→
Technical data)
The following restrictions apply to the unit:

Do not use for long-term operation (e.g. continuous recirculation of the water in a pond).

Not suitable for salt water.
 Never use for pumping dirty water/waste water.
 Do not connect to the drinking water supply.

Not suitable for drinking water.

Do not use for commercial or industrial purposes.

Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.