- EN -
67
7.3.1 Adding an EGC-compatible device
"My devices" screen
A maximum of 10 EGC-compatible devices or devices with hand-held transmitter can be added to the In-
Scenio FM-Master EGC.
How to proceed:
1. Tap
to open the list with available OASE devices.
– When the list is opened, the InScenio FM-Master EGC automatically searches for connected EGC de-
vices. The EGC devices must be correctly connected to the EGC network and switched on so that the
InScenio FM-Master EGC can find the EGC devices. Found devices are displayed in colour in the list and
the message "Device found" is shown underneath the product name.
– EGC-compatible devices are marked with the EGC logo (Easy Garden Control) in the product image.
– To search for connected EGC devices again, tap
.
2. Select the desired EGC-compatible device in the list.
– Only EGC devices found by the InScenio FM-Master EGC in the EGC network can be added.
– For information on the device, tap . If the following prompt is confirmed with "OK", the OASE homepage
with the relevant product information opens in your browser.
3. Tap
to add the device.
– The device has been added to the device list.
4. To give the added device a name, switch to the device overview.
5. Select the desired device in the device overview and tap
.
– A dialogue field will open.
6. Enter the device name and confirm with "OK".
– The device name has been assigned.
N O T E
If there are several devices of one type, repeat the process for each device.
