Oase InScenio FM-Master Cloud, Commissioning

Page: 17 / 180

EN
17
Operating conditions indicated by the Status LED
LED colour LED status Description
– Off The InScenio FM-Master Cloud is switched off.
Green Lit A direct connection is established.
Flashing slowly
(1× per second) A connection to a WiFi network is established.
Yellow Lit The InScenio FM-Master Cloud starts or is in firmware update mode.
Flashing fast A firmware update is in progress.
Flashing slowly
(2 s on, 1 s off) The InScenio FM-Master Cloud is attempting to establish a connection
to the router. This can take several minutes.
•
If no connection is found, check the WiFi connection. If necessary,
reduce the distance between the InScenio FM-Master Cloud and the
router.
Red Flashing An internal error has occurred; recommended procedure:
•
Disconnect the power supply, wait for approx. 10 seconds, then re-
establish the power supply.
•
If the error remains active, ...
−
use the "OASE Control” app to check for new firmware. If neces-
sary, install new firmware.
−
reset the device to its factory settings and restart it. (
→
Service
button functions)
−
contact the OASE service.
Service button functions
Operation Description
Press and hold for 5 seconds until a
short beep confirms reset Resetting the network settings
•
The network settings are reset to the delivery default settings.
•
All other settings are maintained (e.g. device list and device set-
tings).
•
During resetting, the status LED first flashes quickly in green, then
lights up in yellow.
Press and hold for 15 seconds until a
continuous beep confirms reset. Reset to factory default settings
•
All settings are reset to the delivery default settings.
•
During resetting, the status LED first flashes quickly in green, then
lights up in yellow.
•
A short signal sounds after 5 seconds. Still, continue to hold the
button down until you hear a continuous beep.